preenfm Forum
PreenFM => preenfm2 and preenfm3 => Topic started by: matrix12x on March 09, 2014, 05:47:46 AM
-
Hi,
My PreenFM2 seems to be working fine, but if I go to upgrade via the usb drive, the PreenFM2 OS is not finding the /pfm2 directory on the thumb drive. any ideas?
1) I made sure I created the directory and put the newest os files on there.
2) I can access the USB drive while it is installed in the PreenFM 2 after booting and holding down a key, then selecting the correct menu options.
-
Did you format the drive with FAT or NTFS?
-
Yes, the drive must be formated with FAT.
(2) makes me thing it's correctly formated.
> the PreenFM2 OS is not finding the /pfm2
You have the "No '/pfm2' directory"
message in the "flash from stick" menu of bootloader, right ?
Can you read, play and save your presets in the preen ?
-
Apparently I could not load the presets.
For some reason it was FAT 16, not FAT32. I reformatted and it seems fine.
I was able to update the OS from the USB stick fine. Thanks! :-)
-
Thanks for the feedback...
-
hey there,
I think i've got the same problem : i can't load the presets i've put in the pfm2 folder (DX7 sysex unzipped files from the download link) ; i can access my usb drive (formatted in FAT32 beforehand), but when i press Menu > Load >SyseX i get a "Waiting SysEx..." message... and then nothing
did i miss something ? guess so, i'm new at using this ;)
-
did i miss something ? guess so, i'm new at using this ;)
Yes ;)
To access your DX7 sysex files, go in the menu Load>DX7
Then choose your bank, then browse the presets.
You should not have Menu>Load>Sysex !! This is now useless. The preenfm2 is always ready to receive success.
What firmware do you have ?
Seems like you flashed an old one.
-
You should not have Menu>Load>Sysex !! This is now useless. The preenfm2 is always ready to receive success.
What firmware do you have ?
Seems like you flashed an old one.
Well, you know... Since i thought i had to flash the bootloader & firmware the DFU way, i flashed the 0.9 version packed with the bootloader. Don't ask me why, that's the "Jumper 3 trap" ;)
Anyway : firmware upgraded from USB (found the file transfer speed was good), DX7 banks loaded, everything's fine, sounds great. Now i'm up to link it with my BCR controler and try some NRPN learning :P
Thanks again Xavier, best consumer service ever ;)
-
The preenfm2 is always ready to receive success.
And it certainly deserves lots of success. SCNR :)
-
@Kentucky : great i'm glad everything works fine... :)
The preenfm2 is always ready to receive success.
And it certainly deserves lots of success. SCNR :)
OOpps.... ::) but thanks :D
Of course you should read : "The preenfm2 is always ready to receive SysEx".