PreenFM Forum

PreenFM => PreenFM2 => Topic started by: cwyss on September 30, 2018, 10:19:18 AM

Title: Default combo does not respect release time setting [Fixed in 2.09]
Post by: cwyss on September 30, 2018, 10:19:18 AM
Hi!

I noticed that when the default combo is loaded at boot time, the release time parameter of Instrument 1, Operator 1 is not affected. It always starts at a value of 2.56 after boot.

My goal was to have a kind of clean init patch after boot with just a pure sine wave and simple gate for all envelopes, i.e.,

Attk lv   Deca lv   Sust lv   Rele lv     
0.00 1.00 0.00 1.00 0.00 1.00 0.00 0.00


But when I make these setting, do menu->Save->Defl->Save, and then reboot, the release time is again at 2.56. All other params are loaded ok from the defl combo.
Title: Re: Default combo does not respect release time setting
Post by: Xavier on October 12, 2018, 11:36:01 PM
Thanks for the report, i'll take a look at that.


[Fixed in 2.09]