preenfm Forum

PreenFM => preenfm2 and preenfm3 => Topic started by: jamesh31 on September 12, 2019, 12:01:34 AM

Title: Arturia Keystep sequencer problem
Post by: jamesh31 on September 12, 2019, 12:01:34 AM

Hello,
I'm new to the PreenFM2, so I may be doing something wrong ... I'm using an Arturia Keystep to play it -- it works fine as a midi controller to play live, but when I want to record a sequence, things go weird -- I'm getting additional instruments when recording (even though the Keystep is set to Midi channel 1 and the PreenFM2 is set to receive/play instrument 1 only with channel 1 messages) and on playing a sequence, notes are missing and, again, additional voices are present


any ideas?

Thanks, James

Title: Re: Arturia Keystep sequencer problem
Post by: Xavier on September 19, 2019, 10:14:20 AM

That's weird.
I have a beatstep (must be the same internal as a keystep) and never saw this problem.
Is midi thru turned off ?
The additional voices comes from other instrument or only instrument 1 ?

Title: Re: Arturia Keystep sequencer problem
Post by: jamesh31 on September 19, 2019, 01:18:52 PM

Midi Thru on the PreenFM2, Keystep or both? I'll check ...
The additional voices are from another instrument, even though the Keystep is set to transmit only on Channel 1 (and the Preen is set to 1-4, instruments 1-4)

I'll have a fiddle tonight... thanks for the reply

James