preenfm Forum
PreenFM => preenfm2 and preenfm3 => Topic started by: godoru on March 08, 2020, 02:23:18 PM
-
Hi! I would like to use the editor but I think that the device is not recognized. Do you have any advice or tutorial? Could it be about drivers?
Cheers
-
Why do you mean bu "not recognized" ?
You don't see "preenfm mk2" in the list of midi device ?
No need for any drivers.
Try the standalone version of the editor first.
You need to give more info about what you do and what does not work exactly.
-
Yes, I don't see preenfm mk2 in the list of midi device. Only AKAI and Windows. And I turned on at the midi USB option from the config of the preenfm2
-
Yes, I don't see preenfm mk2 in the list of midi device. Only AKAI and Windows. And I turned on at the midi USB option from the config of the preenfm2
Standalone version or plugin ?
In the plugin version you have to make sure "preenfm mk2" is not used by the DAW/host.
-
Standalone version
-
Can you try with another cable ?
And double check the Usb socket soldering points.
-
will try! I don't know if it is similar to midi through USB but I can go on the boot device if I start the preen in that mode (saying that cause of the usb socket soldering points) thanks!!
-
will try! I don't know if it is similar to midi through USB but I can go on the boot device if I start the preen in that mode (saying that cause of the usb socket soldering points) thanks!!
You mean you can access the USB key from your computer in bootloader mode ?
If yes no need to verify the solder points. They're OK.
What OS do you use on your computer ?
Have you tried on another PC ?
-
You mean you can access the USB key from your computer in bootloader mode ?
If yes no need to verify the solder points. They're OK.
Yes, that's what I mean. Windows 10 Home is running. Nope, haven't tryied in another PC.
-
Solved... it was about the usb hub. Thanks!