preenfm Forum

PreenFM => preenfm2 and preenfm3 => Topic started by: lokki on January 10, 2021, 11:18:56 PM

Title: voice volume as mod-destination
Post by: lokki on January 10, 2021, 11:18:56 PM
i would like to control a voice volume by aftertouch. somehow i cannot get it to work via the mod matrix. mix * kind of works but only to lower volume on a high aftertouch value. (i need to set mult to a negative value). i would like to make the patch louder when i apply more pressure.

can volume of a voice be added to the mod-destinations?
Title: Re: voice volume as mod-destination
Post by: Xavier on January 15, 2021, 06:01:56 PM
Yes Mix is limited to 1.0 in the internal engine even after applying matrix modification.
I was about to change it but it may change how some existing presets currently sound. So i'd like to avoid that.

There's a way to achieve that by using "Mix *" destination.
Go to Edit>FM>Mix and set all Mix to a value lower than 1. Let's say 0.2 (use MENU + encoder to turn down all mix value at the same time).
If the level is to low you can go in the Mixer volume to turn it up for the whole instrument.

After that having a line in the matrix such as :
AftTo  /  0.8  /  Mix *
Will do what you want.