PreenFM Forum

PreenFM => preenfm2 and preenfm3 => Topic started by: hitachii on January 14, 2021, 02:47:21 AM

Title: PreenFM2 R6 Which MIDI pins to solder?
Post by: hitachii on January 14, 2021, 02:47:21 AM
Hi, I haven't found the direct answer to this elsewhere on the forum. On the directions, three pins go to the MIDI out, while two go to the MIDI in jacks. Which pins do those connect to?I found the documentation linked at the Teensy MIDI page here: https://www.pjrc.com/teensy/td_libs_MIDI_sch_t3.png

Is the PreenFM2 R6 supposed to be wired the same as pictured here? Wanted to be absolutely sure! Thanks.
Title: Re: PreenFM2 R6 Which MIDI pins to solder?
Post by: Xavier on January 14, 2021, 08:39:33 AM

Yes that's how the midi DIN5 should be soldered.
You can see the IN 5/4 and OUT 2/5/4 pins labeled on the PCB.
So you just have to wired this pins to the correct DIN5 pins.