Messages

1

preenfm2 and preenfm3 / Re: PreenFM Eurorack module

« on: December 07, 2019, 04:40:55 PM »

Hi both,

I reduced the threshold and that worked. Now at 20% I get all the notes. Thanks for leading me in the right direction.

What about the jumpers, what do they do that I should consider additionally?

Thanks,
Alexander

2

preenfm2 and preenfm3 / Re: PreenFM Eurorack module

« on: December 01, 2019, 10:10:44 PM »

This value is at 50%. I did not try to change it. What does 0% or 100% mean? Does it change the way the voltage is read from the CV input?

Otherwise I did not do anything particular. I loaded different sounds from the USB stick which was included. They load fine. With MIDI I can play a sequence with the loaded instrument. If I connect CV and Gate from the same sequencer nothing happens at all. These voltages work on other VCO‘s and EG‘s so no Problem on that side.

I have tried changing in the settings menu CV instrument from 1 to the other three choices, no difference.

Anything else I can try!

Thanks for your help.
Alexander

3

preenfm2 and preenfm3 / Re: PreenFM Eurorack module

« on: December 01, 2019, 05:26:46 PM »

Hi, I got a ready built preenFM2 Eurorack Module. It works great with MIDI however I cannot trigger a sound with the CV/Gate CV inputs. As described above I am choosing the instrument in the settings. I am on Firmware 2.09. Can anyone point in the right direction?
Thanks, Alexander