Messages

1

preenfm2 and preenfm3 / Re: Manual in PDF format

« on: March 12, 2018, 03:34:04 AM »

Thank you!!!

2

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 18, 2018, 06:06:51 AM »

I got the screen from eBay.  I will check the power pin.

3

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 17, 2018, 05:33:49 AM »

Here are the pictures in question.  Should I start a new forum topic addressing the issue?

4

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 13, 2018, 10:45:55 PM »

I got it up and running after I removed and reseated the Preenf405 chip.  For some reason, it was showing the bootloader showing that it was connected but it would not boot until I reseated and soldered the chip in place. 

I do have an issue with the screen display.  Between lines two and line three there are lines above the characters.  Is this normal or do I possibly have a bad screen/ connection with the screen?

5

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 09, 2018, 07:05:44 PM »

I will try with a third one.  Is there a possible issue with formatting in fat32 in Windows 10 that might cause the issue?

6

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 09, 2018, 06:56:36 PM »

I am the guy who requested for more stuff from you on Facebook. :-)

7

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 09, 2018, 06:51:13 PM »

I can press the top button on the left and enter bootloader mode but it will not access the usb drive.

8

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 09, 2018, 06:49:22 PM »

It is in the pfm2 folder as instructed.

9

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 09, 2018, 04:34:07 PM »

I have tried to format in both windows and osx using the basic format tools to format to fat32

10

preenfm2 and preenfm3 / Re: Problem starting PreenFM2

« on: January 08, 2018, 11:42:52 PM »

I can not see it in Mac or Windows.  It shows the block on all of the OLED when I start the synth.  Tried the instructions in the FAQ and no solution.

11

preenfm2 and preenfm3 / Problem starting PreenFM2

« on: January 08, 2018, 05:38:48 PM »

Hi  I am having issues booting from USB stick.  It will load into bootloader, but will not load into the synth.  I have tried to reformat the drive I have tried to use a different usb stick.  I have tried to reflash the bootloader.  I have checked the connections on the usb port.  I do not know what to do next.