Author Topic: Firmware: PreenFM2 Bug report  (Read 14888 times)

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Firmware: PreenFM2 Bug report
« on: November 19, 2013, 09:41:41 AM »
Please report here any bug you may find.
Don't forget to specify the firmware you use. It shows up when you switch on the PreenFM2.

Thanks
« Last Edit: November 22, 2013, 08:18:30 AM by Xavier »

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: PreenFM2 Bug report
« Reply #1 on: November 19, 2013, 11:18:51 PM »
hello getting quite a lot of glitches on lcd misspellings and the like, using 0.9c. also can load up dx7 patches but not the bank and combo patches from the pfm2 zip file.

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: PreenFM2 Bug report
« Reply #2 on: November 20, 2013, 07:36:51 AM »
Hi Martin,

The LCD misspellings must be because of the tight timing i use that works with the LCD provided with Kit.
What LCD do you use ?
I'll upload today a version with larger delay.

For the bank and combo patches, i've just tried and it works.
What Usb drive do you use ?
What error do you get ?
And last question, can you read and save on bank created from the menu ? tools->create->bank  / combo ?
If you haven't try, I would suggest you to download again the zip file, format your USB stick (slow formating) and extract the zip again on it.

Xavier
« Last Edit: November 20, 2013, 08:10:56 AM by Xavier »

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: PreenFM2 Bug report
« Reply #3 on: November 20, 2013, 11:10:23 AM »
hello thanks for the reply, yes i can read and save files just cannot preview or select different sounds  ( always the same sound). i can now get the preen bank to work but not the combo or bank file

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: PreenFM2 Bug report
« Reply #4 on: November 20, 2013, 11:13:04 AM »
hi sorry also used this lcd from mouser 992-LCD-20X4Y
many thanks great sounds

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: PreenFM2 Bug report
« Reply #5 on: November 20, 2013, 06:13:29 PM »
Thanks for the information.

For your LCD problem :
Could you try the firmwares that are in this zip file : https://dl.dropboxusercontent.com/u/41654198/preenfm2/firmwares/fix_lcd.zip
In the order 35, 36, 37, 38.
And let me know the first one that fix your problem, if any.
Just extract them in "pfm2" on your USB drive and power the preenFM while pressing the "OP" button. Then select the one to flash. (but you may already know that ;-)

Regarding the banks, what you have is totally normal, "combo" and "bank" are here to allow you to save your presets. They all contains the same preset by default.

Thanks

« Last Edit: November 20, 2013, 06:17:21 PM by Xavier »

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: PreenFM2 Bug report
« Reply #6 on: November 20, 2013, 07:02:04 PM »
many thanks will try those later

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: PreenFM2 Bug report
« Reply #7 on: November 20, 2013, 10:11:53 PM »
hi there 38 has worked the best it is normal in edit mode but when i enter flash mode with op button pressed it is still v glitchy. ok for now. cheers

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: PreenFM2 Bug report
« Reply #8 on: November 20, 2013, 10:23:32 PM »

Thanks for the feedback.

What you describe is normal the bootloader (flash mode) still use the old 34 value.
I'll make some test under heavy load with 38 and if everything works fine, it will be the default value in the next firmware.

Xavier


Altitude

  • Team member
  • *
  • Posts: 34
    • View Profile
Re: Firmware: PreenFM2 Bug report
« Reply #9 on: November 23, 2013, 04:01:44 AM »
The newhaven OLED has all sorts of issues as well.  It only displays something when the menu button is pressed (nothing on start up) and then instead of increment values, it scrolls everything left to right.  Everything is misaligned also and it made all sorts of noise (the display actually made noise) at the 34 setting.  If it's any help, I used the same display with the Preen 1 without issues

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: Firmware: PreenFM2 Bug report
« Reply #10 on: November 23, 2013, 09:31:39 AM »
The newhaven OLED has all sorts of issues as well.  It only displays something when the menu button is pressed (nothing on start up) and then instead of increment values, it scrolls everything left to right.  Everything is misaligned also and it made all sorts of noise (the display actually made noise) at the 34 setting.  If it's any help, I used the same display with the Preen 1 without issues

Have you tried the other firmware in the zip above.
Could you confirm me that the firmware 38 does fix the problem with your LCD ?
If yes i'll release it as an official patch today.

Which Oled do you have  ?

Thanks,
Xavier
« Last Edit: November 23, 2013, 09:33:45 AM by Xavier »

Altitude

  • Team member
  • *
  • Posts: 34
    • View Profile
Re: Firmware: PreenFM2 Bug report
« Reply #11 on: November 23, 2013, 01:42:14 PM »
I tried all the alternate firmwares and all had the same behavior. This is the one I use: http://www.mouser.com/ds/2/291/NHD-0420DZW-AY5-30221.pdf

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: Firmware: PreenFM2 Bug report
« Reply #12 on: November 23, 2013, 03:23:20 PM »

I plugged an OLED screen i had on a PreenFM1 and i confirm it does not  work. (Just realized it's exactly the same as yours).
Having it working is number one on my priority list. I'll work on that tomorrow.

Xavier


Altitude

  • Team member
  • *
  • Posts: 34
    • View Profile
Re: Firmware: PreenFM2 Bug report
« Reply #13 on: November 23, 2013, 03:59:03 PM »
Outstanding. I appreciate it, your device deserves the OLED treatment

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: Firmware: PreenFM2 Bug report
« Reply #14 on: November 24, 2013, 03:36:25 PM »
Outstanding. I appreciate it, your device deserves the OLED treatment

http://ixox.fr/preenfm2/0-9d-firmware-oled-compatibiltity/

You can try last firmware 0.9d + firmware 1.01 and let me know  ;)
http://ixox.fr/preenfm2/download/

Xavier
« Last Edit: November 24, 2013, 03:38:18 PM by Xavier »