Author Topic: 1.00 : finally  (Read 88670 times)

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #135 on: March 30, 2014, 02:23:57 PM »
hi another suggestion if possible. Is it possible to have a latched arp continue to play while auditioning other presets.

thanks

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #136 on: March 30, 2014, 05:58:59 PM »
hi another suggestion if possible. Is it possible to have a latched arp continue to play while auditioning other presets.
thanks

Good idea...
Preventing latched arp to stop when changing preset would be enough.
I add that on the "Idea" list ;-)

Not sure what will make the arp stop though....

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #137 on: April 01, 2014, 07:26:17 PM »
hello again this might be going too far but is there a way to split the keyboard so that instrument 1 plays lower end and any higher is played by another instrument.

just a thought

cheers

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #138 on: April 01, 2014, 10:51:13 PM »

Hi Marin,

I won't integrate that soon in the engine, but i think there are many tools that can do that for you.
I have a "Graphite 25" small keyboard, and it has zones that have their own midi chanel and can do that very easily.

Or you'll have to tweak the code. MidiDecoder.cpp => midiEventReceived() => case MIDI_NOTE_ON.
If you have some programming notion, you can easily split the keyboard to fit your need.




martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #139 on: April 03, 2014, 03:45:42 PM »
hello again

another question, I cannot seem to be able to modulate mix* with free env 1 & 2 or step seq 1/2.

cheers any news on new firmware

thanks again

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #140 on: April 03, 2014, 09:55:03 PM »
hello again
another question, I cannot seem to be able to modulate mix* with free env 1 & 2 or step seq 1/2.

I think you had reached the limit max of Mix values... values between 0.0 and 1.0.
To check, set the mix values to 1.0.
Then chose negative mulitplier in the matrix.

cheers any news on new firmware
thanks again

Just uploaded.
With a new feature from Patrick  :D
« Last Edit: April 03, 2014, 10:03:32 PM by Xavier »

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: 1.B12 : arpeggiator user pattern
« Reply #141 on: April 04, 2014, 03:03:53 AM »
fantastic

pld

  • Team member
  • *
  • Posts: 41
    • View Profile
Re: 1.B12 : arpeggiator user pattern
« Reply #142 on: April 04, 2014, 12:59:24 PM »
Have fun trying out the user patterns, let me know how it goes!

-- Patrick

martindunne

  • Team Member
  • ***
  • Posts: 118
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #143 on: April 04, 2014, 07:44:37 PM »
hello again
another question, I cannot seem to be able to modulate mix* with free env 1 & 2 or step seq 1/2.

I think you had reached the limit max of Mix values... values between 0.0 and 1.0.
To check, set the mix values to 1.0.
Then chose negative mulitplier in the matrix.

Yep my mistake, i do get a little clipping tho if i set mix values to 0.00 and use env 1/2 and 10.0 multiplier. on env1 clipping starts to occur when the release is at about 0.40 or above.

also when on new user arp page (which is awesome and have had so much fun with it already) and i load another patch it stays on user page when no arp is selected briefly

And could patrick look into the possibilities of an arp step sequencer where for instance you could program it to play user arp 1 four times then user arp 2 three times etc. (with one programmable slot above each encoder ) just an idea.


Xavier : Edited to close the quote
« Last Edit: April 04, 2014, 09:13:49 PM by Xavier »

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #144 on: April 04, 2014, 09:17:14 PM »
also when on new user arp page (which is awesome and have had so much fun with it already) and i load another patch it stays on user page when no arp is selected briefly

We discussed that with Patrick.
The other solution would be to change the row but in this case we wouldn't arrive back on the same page after pressing 4 times INST. Even if only one instrument does not have arpegiator enabled.
I think the current behaviour is the better untill a bigger modification that would save the "current row" of each instrument.


pld

  • Team member
  • *
  • Posts: 41
    • View Profile
Re: 1.B11 Firmware March 26th
« Reply #145 on: April 04, 2014, 10:04:11 PM »
And could patrick look into the possibilities of an arp step sequencer where for instance you could program it to play user arp 1 four times then user arp 2 three times etc. (with one programmable slot above each encoder ) just an idea.
Heh, I thought briefly about being able to chain patterns but wasn't really sure where to go with it. And I didn't spontaneously have a good plan how to implement it ;)
But I'll give it some thought...

-- Patrick


matrix12x

  • Team Member
  • ***
  • Posts: 188
    • View Profile
Re: 1.B12 : arpeggiator user pattern
« Reply #146 on: April 05, 2014, 04:30:09 AM »
The custom arps are an awesome idea!! great work. I started playing with this right away!

kuzma_p

  • Team Member
  • ***
  • Posts: 130
    • View Profile
Re: 1.B12 : arpeggiator user pattern
« Reply #147 on: April 05, 2014, 11:09:28 AM »
Yes, have to say that firmware goes good route and getting better and better. Thanks!
Would be nice to have access to some arp parameters in mod matrix as destinations. Divider and Duration and Direction for example.

dimifrag

  • Team Member
  • **
  • Posts: 52
    • View Profile
Re: 1.B12 : arpeggiator user pattern
« Reply #148 on: April 05, 2014, 11:25:30 PM »
Hi Xavier!
When i update the preenfm and start, my default instruments has disappear!
why?????
Thanks

recliq

  • Team member
  • *
  • Posts: 6
    • View Profile
Re: 1.B12 : arpeggiator user pattern
« Reply #149 on: April 06, 2014, 01:28:35 PM »
Quote from: FAQ
What did i lose my settings after flashing the last firmware ?

If a new setting has been added or a setting has been removed, the settings are all reset. You have to change your preference again.