PreenFM > preenfm2 and preenfm3
USB is only good for power supply
kx3:
Hi, my PreenFM2 doesn't show in any of 3 computers (win7 win10 and Linux Ubuntu) neither as Midi interface or as USB stick when it boots with button 1 pressed.
However it powers ON and works with USB power.
I built it and flashed its bootloader to v1.11 a few months ago with the mini-usb.
I've try with several USB Cable and USB-midi is turned on in system.
Running firmware 2.07.
Any clue?
Xavier:
Hi,
Is the USB midi enabled ?
See 3.1 here, first setting :
http://ixox.fr/preenfm2/manual/menu-mode/
Xavier
kx3:
Yes it's on
Xavier:
--- Quote from: kx3 on April 12, 2017, 07:16:25 AM ---I built it and flashed its bootloader to v1.11 a few months ago with the mini-usb.
--- End quote ---
I just realized you wrote "Mini-USB" ?
So you have a CERB40 cpu board ?
You need a wire to link the case USB to the CERB40 mini USB.
Search for CERB40 in this old-PCB page :
http://ixox.fr/preenfm2/build-it/the-pcb/
kx3:
Doh!
I thought it was only used to flash the bootloader....
Navigation
[0] Message Index
[#] Next page
Go to full version