Author Topic: midi out not working (solved)  (Read 4223 times)

Toltekradiation

  • Sr. Member
  • ****
  • Posts: 254
    • View Profile
midi out not working (solved)
« on: June 03, 2018, 05:40:32 PM »
hi !
I'm a proud new owner of a preenfm2, I really like it..
thanks for making it happen !

I wanted to let you know about a trouble I encountered about midi out :
in my built I could not get midi out to work, after some head scratching I found that page :
https://www.pjrc.com/teensy/td_libs_MIDI.html

according to that page, the midi out resistors values should not be the same when using 5v or 3.3v -> in the preenfm, the resistor are 220 ohm and should be 47 ohm as the voltage is 3.3v on that zone.
so i tried to put a 220ohm in parallel on the midiout pullup resistor : bingo ! midi out is now seen by my midi interface (edirol UM-2ex) :D

best regards
Patrice

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2257
    • View Profile
Re: midi out not working (solved)
« Reply #1 on: June 03, 2018, 09:13:55 PM »

Interesting, thanks for the feedback.

Megalomidiac

  • Team member
  • *
  • Posts: 40
    • View Profile
Re: midi out not working (solved)
« Reply #2 on: June 16, 2018, 06:02:50 PM »
What a coincidence, I have the problem, too with my teensy midi controller.
Will try this, thank you!

If you look at here: http://ixox.fr/preenfm2/build-it/dsc00782/#main which 220 is it from the 3 on the right side, the first I think?
« Last Edit: June 16, 2018, 06:17:55 PM by Megalomidiac »

Toltekradiation

  • Sr. Member
  • ****
  • Posts: 254
    • View Profile
Re: midi out not working (solved)
« Reply #3 on: June 18, 2018, 09:50:30 AM »
Yes, exactly, the resistor i modified is the closest to the ld1117.