Author Topic: Default combo does not respect release time setting [Fixed in 2.09]  (Read 89 times)

cwyss

  • Team member
  • *
  • Posts: 7
    • View Profile
Hi!

I noticed that when the default combo is loaded at boot time, the release time parameter of Instrument 1, Operator 1 is not affected. It always starts at a value of 2.56 after boot.

My goal was to have a kind of clean init patch after boot with just a pure sine wave and simple gate for all envelopes, i.e.,

Attk lv   Deca lv   Sust lv   Rele lv     
0.00 1.00 0.00 1.00 0.00 1.00 0.00 0.00


But when I make these setting, do menu->Save->Defl->Save, and then reboot, the release time is again at 2.56. All other params are loaded ok from the defl combo.
« Last Edit: October 28, 2018, 08:29:01 AM by Xavier »

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 1329
    • View Profile
Re: Default combo does not respect release time setting
« Reply #1 on: October 12, 2018, 11:36:01 PM »
Thanks for the report, i'll take a look at that.


[Fixed in 2.09]
« Last Edit: October 28, 2018, 08:29:16 AM by Xavier »