preenfm Forum
PreenFM => preenfm2 and preenfm3 => Topic started by: mindstuff on November 04, 2022, 09:25:42 PM
-
Just got the PreenFM3 yesterday (preassembled) and love the sound and idea of the separate outputs...bravo.
A few questions.
- Is there a way to have the last mix load up during bootup?
- Is there a way to turn off the unit other than pulling out the usb plug every time?
- What is the light signify between the 'd' and 'e' encoders?
Thank so much. Cheers.
-
Hi,
1. Yes. Menu>Mixer>Default>Save
2. You need a bit of DIY for that. There's 2 pins that should be shorted on the PCB between which you can insert an switch.
You can also use something like this (https://www.amazon.fr/Baoblaze-Inline-Switch-Manual-5-5x2-1mm/dp/B089RRN83Q).
3. Led On when in bootloader mode.
Also blinks in sync with midi clock input.
Cheers
-
Hi,
1. Yes. Menu>Mixer>Default>Save
2. You need a bit of DIY for that. There's 2 pins that should be shorted on the PCB between which you can insert an switch.
You can also use something like this (https://www.amazon.fr/Baoblaze-Inline-Switch-Manual-5-5x2-1mm/dp/B089RRN83Q).
3. Led On when in bootloader mode.
Also blinks in sync with midi clock input.
Cheers
Thanks so much for the info.