preenfm Forum
PreenFM => preenfm2 and preenfm3 => Topic started by: bbbb on October 04, 2014, 12:03:42 PM
-
Hey all
For my live performance I'm trying to scroll to 10 combos in a simple way. Now I'm loading them in through the menu. Is there also a way to scroll through them? :-[
Thanks,
Bert
-
You cannot do that directly from the preenfm2.
Don't know if that's doable with your live configuration but you can send midi information:
Use CC #0 (=1) and #32 (=combo bank number) to select the combo bank.
Then program change CC will load your combo preset.
http://ixox.fr/preenfm2/manual/midi/
Xavier
-
A bit late in replying, but still, works great! Thanks.
When I send a Program Change (bank 1 / combo#10), instrument one, which is saved as "Clicksine" in the combo, becomes the standard "Preen mk2" sound. Am I doing something wrong here?
-
A bit late in replying, but still, works great! Thanks.
When I send a Program Change (bank 1 / combo#10), instrument one, which is saved as "Clicksine" in the combo, becomes the standard "Preen mk2" sound. Am I doing something wrong here?
Sorry i don't understand....
What do you send exactly, what do you get and what did you expect ?
-
I'm sending a program change to bank 1 / combo #10, this should change to combo #11, right? Because the Preen Combos starting at 1 instead of 0.
If I send that the instruments 2,3,4 change into the correct instruments saved into the combo. Instrument 1 changes into another.
-
I'm sending a program change to bank 1 / combo #10, this should change to combo #11, right?
I'm not sure what CC you send...
First select the combo bank.
CC #0 = 1 (You will select a combo bank).
CC #32 = 0-7 (select combo bank number).
Then program change actually load the combo.
Because the Preen Combos starting at 1 instead of 0.
No every bank and presets starts at 0. Specialy for the midi compatibility.
I just sent
CC#0 = 1
CC#32 = 0
(In some DAW such as studio one you have to enter 1*128+0 = 128 in bank).
And then program change correctly loaded the combos.