preenfm Forum
PreenFM => preenfm2 and preenfm3 => Topic started by: Onosendai on July 27, 2014, 02:19:25 AM
-
Hi all !
How to change a combo by CC or NRPN ? I've tried to send MSB#1 + LSB#32, then the number of my combo, but it doesn't work. Do i miss something ?
Are the combo unique when we save them ? If i change a program that was in multiple combos, does it change all the combos ? Or each combo are independant.
-
Hi,
How to change a combo by CC or NRPN ? I've tried to send MSB#1 + LSB#32, then the number of my combo, but it doesn't work. Do i miss something ?
That should work.
You followed the NRPN here : http://ixox.fr/preenfm2/manual/midi/ ?
What did you send exactly ?
EDITED : Oops... What i wrote was totally wrong !!
Are the combo unique when we save them ? If i change a program that was in multiple combos, does it change all the combos ? Or each combo are independant.
The Combos are totally independant from each others and from the presets.
Modifying a program in one combo does not change any other programs.
Xavier
-
What did you send exactly ? The combo number must be set with CC#6 = 0 and CC#38 = <combo number>
As Combo number <= 127 CC#6 will be equal to 0. But don't fortget to set it at least once.
i dont understand, can you give a concret exemple please ? Do i need to use CC or NRPN ?
I use a Cirklon, on each step i can send NRPN or CC. I've tried this :
Step 1 > NRPN message (MSB#1 + LSB#32) > Number 1 (combo numbe one) ==> don't work
I've also tried
Step 1 > CC#6 = 0
Step 2 > CC#38 = 1
And i got a vibrato effect (i can change speed with CC#38) but it doesn't change combo.
> The Combos are totally independant from each others and from the presets. Modifying a program in one combo does not change any other programs.
Perfect !
-
:-[ Sorry for the confustion what i wrote was totally wrong.
The bank is done with CC and the loading the preset is a program change. No NRPN here.
You select the bank with CC#0 (bank select) and CC#32 (bank select LSB) as describe here : http://ixox.fr/preenfm2/manual/midi/
See the midi messages : http://www.midi.org/techspecs/midimessages.php
Then you can use "program change" to change the preset inside the bank you selected.
See program change in the top of the table in the previous link...
Xavier
-
It works now, thanks !