preenfm Forum

PreenFM => PreenFM1 (the blue one) => Topic started by: aux-in on December 15, 2012, 02:17:39 AM

Title: Audio sometimes cuts out when changing patches (v 2.00)
Post by: aux-in on December 15, 2012, 02:17:39 AM

Hi,
Sometimes when I switch patches, the audio will cut out to a nearly inaudible level.
99% of the time, I can resolve the issue by unplugging the audio out and re-inserting the cable.
Any idea what might be causing this? Has anyone else encountered it?

Thanks.

Title: Re: Audio sometimes cuts out when changing patches (v 2.00)
Post by: Xavier on December 15, 2012, 10:55:49 PM

Hi,

No i've never heard about such a problem. That's strange.
Could you try to double check the solder points near the capacitor of the output stage ?
(see jpg attached - don't forget the ground of the volume pot)

What audio interface do you use ?
Maybe the PreenFM send a loud signal at some point and your audio interface protect itself by turning down the volume...

Xavier

Title: Re: Audio sometimes cuts out when changing patches (v 2.00)
Post by: 6581punk on December 29, 2012, 04:28:03 PM

I had similar issues (the sound faded out on start up) and resoldered some joints to resolve it. Just double check the soldering and resolder and you should be okay.