preenfm Forum
PreenFM => preenfm2 and preenfm3 => Topic started by: djencode on October 27, 2016, 10:06:03 AM
-
Now that I have a metal case, I'm finding the buttons aren't long enough to stick out in the metal case, so I want to try and find new ones! Also what are some good resources for picking out new knobs?
-
Encoder knobs ? or push buttons ?
Both of them should work fine on the metal case ???
The e-switch tacs (http://www.digikey.com/product-detail/en/e-switch/TACWHT/EG1088-ND/101328) should stick out by 1mm with the metal case... compared to 3 or 4 with the plexy case.
But 1mm is enough and give a pleasant feel to my opinion.
I'm not sure you cand find "compatible" taller ones.
Xavier
-
Unfortunately they don't stick out at all. They are completely flush with the metal case. As for encoders can i use any replacement encoders?
-
Unfortunately they don't stick out at all. They are completely flush with the metal case. As for encoders can i use any replacement encoders?
That's not normal.
Seems like the PCB and the top panel are not closely enough screwed.
Is the OLED screen blocking ?
Could you send a picture of the OLED headers and a one that show the current situation ?
Replacement encoders with longer sticks ?
Encoders are this one http://www.mouser.fr/Search/ProductDetail.aspx?R=PEC11R-4220F-S0024virtualkey65210000virtualkey652-PEC11R-4220F-S24
20 in 4220F is the number of mm.
You can try PEC11R-4225F-S24 or -PEC11R-4230F-S24.