preenfm Forum

PreenFM => preenfm2 and preenfm3 => Topic started by: Cluso on April 08, 2022, 10:19:18 AM

Title: [Added in V1.10] OSC Parameter copy&paste
Post by: Cluso on April 08, 2022, 10:19:18 AM

Hi everyone,

I am wondering if there is a shortcut to copy&paste parameters from one OSC to another directly on the preenfm3. It is possible for the ADSR envelopes in the software editor - it would be super handy to do the same directly on the device.

Thanks, cluso

Title: Re: OSC Parameter copy&paste
Post by: Xavier on April 11, 2022, 09:10:52 PM

Hi Cluso,

No there's not such shortcut.

The more difficult part for that kind of feature is the UI part.
What key to use ? to copy ? to past ?
Any info on the screen showing an operator is currently copied in the buffer ?
Also midi out must be sent for the 11 parameters that are modiffied.

I have to think a little about that.
But that would be usefull i agree.
Specially if it works per page : oscillator, enveloppe, LFO, Matrix.

Title: Re: OSC Parameter copy&paste
Post by: Cluso on April 12, 2022, 03:59:45 PM

Hi Xavier,

Yes, this could apply to several settings beyond the envelopes, that'd be really cool. Two possibilities could be:
- Hold Menu and - / + to copy and paste page (similar to "play the test tone" with Menu and 1-6)
- Long press - and long press + to copy and paste page


Meanwhile, I found out that holding Menu while turning the knobs changes (relative) values for all envelopes at the same time. This is already a really useful feature.

cluso

Title: Re: OSC Parameter copy&paste
Post by: Xavier on April 18, 2022, 09:47:18 PM

 
Long press "-" to Copy and "+" to paste.
You can try v0.110 that i've just posted.

Title: Re: [Added in V1.10] OSC Parameter copy&paste
Post by: Cluso on April 19, 2022, 10:31:43 PM

Hey,
This works like a charm - thank you so much for incorporating it!