Messages

46

preenfm2 and preenfm3 / Re: New PCB overview...

« on: April 11, 2014, 02:58:09 PM »

yep seems to have just been reversed, maybe add the string as these encoders are really cheap on ebay
http://www.ebay.co.uk/itm/5-10Pcs-12mm-Rotary-Encoder-Push-Button-Switch-w-Keyswitch-Use-With-PIC-ATMEL-/121195339728?pt=UK_BOI_Electrical_Components_Supplies_ET&var=&hash=item1c37ce1fd0

47

preenfm2 and preenfm3 / New PCB overview...

« on: April 11, 2014, 02:02:51 PM »

Note by Xavier : extracted from the firmware thread....
----------------------------------------------------------------


I agree, maybe a "compare" button to compare the changes you have made to the patch from the original saved patch??

Also just completed new board (thanks Xavier) Everything went together beautifully. Have had to cannibalise my other Preen for the Cerb40 as watterott  are out of stock got a wait of 2 weeks to get my hands on it. Also as photos I swapped outer connections of the "backwards" encoders and all works well. Just need to add leds and give it a clean
Thanks once again

48

preenfm2 and preenfm3 / Re: New Kits

« on: April 07, 2014, 11:33:08 PM »

will try them and see

49

preenfm2 and preenfm3 / Re: New Kits

« on: April 07, 2014, 02:21:41 PM »

My lie there is also this

50

preenfm2 and preenfm3 / Re: New Kits

« on: April 07, 2014, 02:19:21 PM »

this is all i can find hope its enough

51

preenfm2 and preenfm3 / Re: New Kits

« on: April 07, 2014, 12:16:45 PM »

Hi Xavier new pcb received this morning with extra bits( thanks a lot). i think i bought encoders which increment in the wrong direction off ebay, is there any code that can fix this or is it better just  to buy some new ones.

thanks again will keep you posted

52

preenfm2 and preenfm3 / Re: 1.B11 Firmware March 26th

« on: April 04, 2014, 07:44:37 PM »

hello again
another question, I cannot seem to be able to modulate mix* with free env 1 & 2 or step seq 1/2.

I think you had reached the limit max of Mix values... values between 0.0 and 1.0.
To check, set the mix values to 1.0.
Then chose negative mulitplier in the matrix.

Yep my mistake, i do get a little clipping tho if i set mix values to 0.00 and use env 1/2 and 10.0 multiplier. on env1 clipping starts to occur when the release is at about 0.40 or above.

also when on new user arp page (which is awesome and have had so much fun with it already) and i load another patch it stays on user page when no arp is selected briefly

And could patrick look into the possibilities of an arp step sequencer where for instance you could program it to play user arp 1 four times then user arp 2 three times etc. (with one programmable slot above each encoder ) just an idea.


Xavier : Edited to close the quote

53

preenfm2 and preenfm3 / Re: 1.B12 : arpeggiator user pattern

« on: April 04, 2014, 03:03:53 AM »

fantastic

54

preenfm2 and preenfm3 / Re: 1.B11 Firmware March 26th

« on: April 03, 2014, 03:45:42 PM »

hello again

another question, I cannot seem to be able to modulate mix* with free env 1 & 2 or step seq 1/2.

cheers any news on new firmware

thanks again

55

preenfm2 and preenfm3 / Re: 1.B11 Firmware March 26th

« on: April 01, 2014, 07:26:17 PM »

hello again this might be going too far but is there a way to split the keyboard so that instrument 1 plays lower end and any higher is played by another instrument.

just a thought

cheers

56

preenfm2 and preenfm3 / Re: 1.B11 Firmware March 26th

« on: March 30, 2014, 02:23:57 PM »

hi another suggestion if possible. Is it possible to have a latched arp continue to play while auditioning other presets.

thanks

57

preenfm2 and preenfm3 / Re: Metal Case

« on: March 29, 2014, 02:52:34 PM »

nice one looks great

58

preenfm2 and preenfm3 / Re: 1.B11 Firmware March 26th

« on: March 27, 2014, 12:58:19 PM »

that works like a charm thanks for the tip.

 it looks like it happens with TUBERISE A on lfo 2 ksyn after about 4.0 or so. and LFO 3 ksyn also gives inconsistent reading

cheers

59

preenfm2 and preenfm3 / Re: 1.B11 Firmware March 26th

« on: March 27, 2014, 11:03:04 AM »

hi testing new firmware. lingering 0 at end of lfo ksyn when first edit but when i change pages its gone.

Also, is there any way of delaying the lfo for instance to start coming in after 4 seconds and completely in by 16.

thanks great firmware

60

preenfm2 and preenfm3 / Re: 1.B10 Firmware March 23rd

« on: March 25, 2014, 08:13:27 PM »

understood

thanks