PreenFM2 midi problem with Beatstep Pro

[Synthusiast]

So I'm having an issue when connecting the FM2 to the Beatstep Pro where if the instrument is being controlled via midi channel 1 it will play just fine on the beatstep. As soon as I hit the record button on Beatstep the value of OP1 Oscillator frequency for instrument 1 goes to 10.5 and then back down to zero if I hit record again. It only affects OP1 Oscillator frequency for instrument 1 and it only happens on midi channel 1.

I can't figure out why thats happening.

I'm using firmware 2.09

Thanks!

[Xavier]

Hi,
You can try to set "receive" to "none" in the menu.
Or use a different midi channel 

[matrix12x]

@Synthusiast what midi events does Beatstep Pro transmit when you hit record?

[Synthusiast]

@Synthusiast what midi events does Beatstep Pro transmit when you hit record?

I'm not positive if this is what you mean but when I press record on the beatstep pro the only change on the Preen is the OP1 frequency increases to 10.5 for ON and back to zero when I press it again to turn rec OFF.

On the beatstep pro when I hit rec it allows me to record what notes I'm playing on the beatstep in real time instead step sequencing it.

[Synthusiast]

You can try to set "receive" to "none" in the menu.

Yeah setting "receive" to "none" works. Have you ever used this with a beatstep pro and had anything like it happen?

[matrix12x]

I meant, like if you looked at MIDI out of the beat step on a MIDI monitor program, what data is sent out the output port.

@Synthusiast what midi events does Beatstep Pro transmit when you hit record?

I'm not positive if this is what you mean but when I press record on the beatstep pro the only change on the Preen is the OP1 frequency increases to 10.5 for ON and back to zero when I press it again to turn rec OFF.

On the beatstep pro when I hit rec it allows me to record what notes I'm playing on the beatstep in real time instead step sequencing it.