[Fixed in v0.91] PreenFM3 v0.90 - output routing

[Xavier]

Ok so where to post it to you?

The 2 i've ordered work fine, but they're different from the picture.
They both have exactly the same PCB,
I assume they put different TFT on it :  one looks great and the other dim without much contrast.
The problem is that they arrive at the same time, and it's impossible to know which one comes from what seller.

I'm going to send you an email, I'll send you a working TFT at the same time.
So that i can try yours and you can try a working one.

[mr-g]

Ok many thanks, ill await your email !

[Olivier]

I just finish to assemble PrrenFm3 and have this problem, Firmware v0.90

MIDI Config :
1 - Sound 1
2 - Sound 1
...
6 - Sound 6

i need to configure Audio output like this :
1  - Sound 2 => Output Audio 1
2  - Sound 1 => Output Audio 2
3  - Sound 4 => Output Audio 3
4  - Sound 3 => Output Audio 4
5  - Sound 6 => Output Audio 5
6  - Sound 5 => Output Audio 6
 
I do not use any SD card. I just start to play with PreenFm3.

The Screen is https://fr.aliexpress.com/item/4001135326039.html?spm=a2g0s.9042311.0.0.4eca6c37SK8ZDM
But i'm not sure if I order  the same screen today, I will get the same screen I got few days or weeks ago. The size of the screen seem to be between 2.4'' and 2.8''.

[lokki]

The size is actually 2.8" but with a different pcb, so the sdcard pins don't align right? I am not sure what your problem is? Can you describe again what you want to do and where it fails?

[mr-g]

You can install 0.91 to fix the output routing issue.

[Olivier]

You can install 0.91 to fix the output routing issue.

Thank you, problem solved

[Olivier]

Firmware 0.91 solve the output routing issue, but now the SDcard doesn't work.

Firmware 0.90 doesn't solve the output routing issue, but the SDcard work.


= = = = = = = = = =
EDITED by Xavier :
SD card problem continues here http://ixox.fr/forum/index.php?topic=69710.0.