Author Topic: [Added in V1.10] OSC Parameter copy&paste  (Read 5010 times)

Cluso

  • Team member
  • *
  • Posts: 9
    • View Profile
[Added in V1.10] OSC Parameter copy&paste
« on: April 08, 2022, 10:19:18 AM »
Hi everyone,

I am wondering if there is a shortcut to copy&paste parameters from one OSC to another directly on the preenfm3. It is possible for the ADSR envelopes in the software editor - it would be super handy to do the same directly on the device.

Thanks, cluso
« Last Edit: April 18, 2022, 09:47:35 PM by Xavier »

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2259
    • View Profile
Re: OSC Parameter copy&paste
« Reply #1 on: April 11, 2022, 09:10:52 PM »
Hi Cluso,

No there's not such shortcut.

The more difficult part for that kind of feature is the UI part.
What key to use ? to copy ? to past ?
Any info on the screen showing an operator is currently copied in the buffer ?
Also midi out must be sent for the 11 parameters that are modiffied.

I have to think a little about that.
But that would be usefull i agree.
Specially if it works per page : oscillator, enveloppe, LFO, Matrix.
« Last Edit: April 11, 2022, 10:02:36 PM by Xavier »

Cluso

  • Team member
  • *
  • Posts: 9
    • View Profile
Re: OSC Parameter copy&paste
« Reply #2 on: April 12, 2022, 03:59:45 PM »
Hi Xavier,

Yes, this could apply to several settings beyond the envelopes, that'd be really cool. Two possibilities could be:
- Hold Menu and - / + to copy and paste page (similar to "play the test tone" with Menu and 1-6)
- Long press - and long press + to copy and paste page


Meanwhile, I found out that holding Menu while turning the knobs changes (relative) values for all envelopes at the same time. This is already a really useful feature.

cluso

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2259
    • View Profile
Re: OSC Parameter copy&paste
« Reply #3 on: April 18, 2022, 09:47:18 PM »
 
Long press "-" to Copy and "+" to paste.
You can try v0.110 that i've just posted.
« Last Edit: April 19, 2022, 08:47:02 AM by Xavier »

Cluso

  • Team member
  • *
  • Posts: 9
    • View Profile
Re: [Added in V1.10] OSC Parameter copy&paste
« Reply #4 on: April 19, 2022, 10:31:43 PM »
Hey,
This works like a charm - thank you so much for incorporating it!