Messages

1

preenfm2 and preenfm3 / Re: Last firmware 1.04

« on: August 11, 2014, 03:30:33 PM »

Modifying the simulated "sample rate" from the matrix ? Why not. ?
The simulated "number of bits" is an integer, so you'll hear audio glitches when it changes.

Cool thing (at least with some waveforms/patches, and tweaking "with caution"...)

2

preenfm2 and preenfm3 / Re: Last firmware 1.04

« on: August 11, 2014, 12:22:02 PM »

Bitcrusher is great fun ! 

same as martindunne :

awesome, thank you again.
Few things, the frequency modifier in the matrix (FLHz) does not work on the new filter types and would it be possible to use that same modifier to adjust the sample or bit rate of the crush effect.

would be great to modulate those parameters ! i guess i'll map the "filter param 1&2" to my controler for the moment... > hours of tweaking   

3

preenfm2 and preenfm3 / Re: creating and saving combos

« on: June 04, 2014, 08:34:26 PM »

In the meantime to save your combo you can use the one from the zip file here :
http://ixox.fr/preenfm2/download/

This is great 

4

preenfm2 and preenfm3 / Re: creating and saving combos

« on: June 04, 2014, 06:58:29 PM »

The midi channels of each of the 4 instruments are independant and can be set in the menu > Tools > Set.

So, combo (or single preset) settings (and saving) are totally independant from channel settings, that's what i wanted to know. And it's cool  (as opposed to DSI Tetra in which combos only allow you to save all instruments on one same channel, which is annoying because you have to set the channels separately each time you boot the device, if you don't want a 4 stacked voices instrument. Hope that makes sense...I should write in french but i feel it has a less "community" feeling  )

5

preenfm2 and preenfm3 / Re: creating and saving combos

« on: June 04, 2014, 04:19:48 PM »

ok thx, i'll try that !

Is it possible to save combos with instruments on 4 different channels, or do they have to be on the same channel ? that's something a dsi Tetra can't do, and it's too bad ; i wish the PFM2 does it, would be great for my sequencer 

6

preenfm2 and preenfm3 / [fixed in 2.10] creating and saving combos

« on: June 04, 2014, 02:50:04 PM »

Hi,

I don't understand how to save combos ; i can save presets / patches easily (save > bank > preset > Done) but when i do the same with combos i only see "empty" combos i can't save... I tried to create a combo (i can set its name and i get a "in progress" message and then "done"), seems to be working but then i can't find that combo. Do I have to create a combo directory first in the usb drive ?

I suppose i forgot something in the process... 

7

preenfm2 and preenfm3 / Re: [Fixed] OS not finding /pfm2 directory

« on: June 03, 2014, 09:13:51 PM »

You should not have Menu>Load>Sysex !! This is now useless. The preenfm2 is always ready to receive success.
What firmware do you have ?
Seems like you flashed an old one.

Well, you know... Since i thought i had to flash the bootloader & firmware the DFU way, i flashed the 0.9 version packed with the bootloader. Don't ask me why, that's the "Jumper 3 trap" 

Anyway : firmware upgraded from USB (found the file transfer speed was good), DX7 banks loaded, everything's fine, sounds great. Now i'm up to link it with my BCR controler and try some NRPN learning 

Thanks again Xavier, best consumer service ever 

8

preenfm2 and preenfm3 / Re: [Fixed] OS not finding /pfm2 directory

« on: June 02, 2014, 10:34:49 PM »

hey there,

I think i've got the same problem : i can't load the presets i've put in the pfm2 folder (DX7 sysex unzipped files from the download link) ; i can access my usb drive (formatted in FAT32 beforehand), but when i press Menu > Load >SyseX i get a "Waiting SysEx..." message... and then nothing

did i miss something ?  guess so, i'm new at using this