Author Topic: New filters  (Read 101433 times)

Toltekradiation

  • Sr. Member
  • ****
  • Posts: 272
    • View Profile
Re: New filters
« Reply #15 on: August 20, 2019, 11:44:31 PM »
@superfake : i tried to get that smoother filter but could not do it right for some reasons ??? .i fear i'm not so good at this kind of programming, i could nearly implement this one https://www.musicdsp.org/en/latest/Filters/23-state-variable.html, which is cpu friendly, but i could not get rid of a high pitch noise in the sound. Those filter equations are quite a mystery for me, i must say.
About the performance parameters, i'm not sure it's possible as it may change the patch structure, must have a closer look...

kaosbeat

  • Team member
  • *
  • Posts: 11
    • View Profile
Re: New filters
« Reply #16 on: August 22, 2019, 01:42:38 PM »
Great!

will this work with the Eurorack version (which has CV1-4 settings in the firmware?)

wanna try

kyoto

  • Team member
  • *
  • Posts: 13
    • View Profile
Re: New filters
« Reply #17 on: August 22, 2019, 02:34:13 PM »
@Xavier
please add this extra types of filters to your software editor 🙏

Megalomidiac

  • Team member
  • *
  • Posts: 40
    • View Profile
Re: New filters
« Reply #18 on: August 22, 2019, 05:24:10 PM »
I can't update any higher version than p2_pvi_210o.bin. All newer versions don't boot, display stays black and no MIDI or sound response.
Have bootloader 1.11. Any suggestions?

There is the preenF405 board instead of the Cerb40 in my PreenFM2, if that makes a difference.
« Last Edit: August 22, 2019, 05:28:59 PM by Megalomidiac »

Toltekradiation

  • Sr. Member
  • ****
  • Posts: 272
    • View Profile
Re: New filters
« Reply #19 on: August 22, 2019, 09:18:45 PM »
hi,
@kaosbeat : it should work as i made changes on the last official sources.
@kyoto: i think that the new filters should be merged first in the master : the editor is for the master version.
 you should consider what i've done so far as a work in progress, i'm still playing with it and it's not bug free. Maybe later, Xavier might want to merge some of the fx when they are stable..
anyway, here is a new version with a bug correction in the hp2 :) + some changes : i removed the swap fx which was too harsh for my taste ; i'm playing now with the idea of bit mangling in 2 new fx texture1 & 2, well, i might as well have named it distortion33 & 68  ;D.
Another change in this version is the filters lp2 & hp2 offset changed to match the original cutoff of lp & hp : in fact, they now sound quite the same, they are maybe just a bit smoother, so lp2&hp2 might replace lp&hp if you guys think it's worth..
@Megalomidiac : that's weird as i also use the preenF405 board with bootloader 1.11 without problem, don't know what can be the cause. :-\

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2260
    • View Profile
Re: New filters
« Reply #20 on: August 22, 2019, 09:49:20 PM »
@kaosbeat : If you flash this firmware on a eurorack you'll lose the eurorack specific features.

@Toltekradiation : FYI the eurorack version is in the "adcIn" git branch : https://github.com/Ixox/preenfm2/tree/adcIn

@megalomidiac : maybe the name is too long if you flash from the the USB key.
Rename it to 8 charaters + ".bin" and try again.

I'll eventually merge this modification into the main branch, add the filters in the editor and release both main and Eurorack version. I just cannot say when  because i have no idea ;)


« Last Edit: August 22, 2019, 10:40:34 PM by Xavier »

kyoto

  • Team member
  • *
  • Posts: 13
    • View Profile
Re: New filters
« Reply #21 on: August 22, 2019, 09:56:42 PM »
guys - thank you very much for your work  ;)
new filters - a breath of fresh air into the sound of this wonderful synthesizer
and waiting this new filters in the new software editor

regards

Megalomidiac

  • Team member
  • *
  • Posts: 40
    • View Profile
Re: New filters
« Reply #22 on: August 22, 2019, 10:54:13 PM »


@megalomidiac : maybe the name is too long if you flash from the the USB key.
Rename it to 8 charaters + ".bin" and try again.

That was the next thing, I wanted to test, but no luck.
I will check tomorrow, if the USB key is bad and will report, thank you!

Megalomidiac

  • Team member
  • *
  • Posts: 40
    • View Profile
Re: New filters
« Reply #23 on: August 23, 2019, 04:47:56 PM »
It now works perfectly, it was indeed a faulty USB key! Thank you all for your work, it is awesome. Played a few presets on it a few minutes ago with a nice plate reverb :)
« Last Edit: August 23, 2019, 05:01:56 PM by Megalomidiac »

kylelandstra

  • Team member
  • *
  • Posts: 16
    • View Profile
Re: New filters
« Reply #24 on: August 23, 2019, 09:42:58 PM »
Hello!

Could someone provide steps to upgrade this for me?  I have upgraded my PreenFM2 to 2.10 o but do not know how to adjust the source code to add these new filters.  Is anyone able to "dumb down" the steps for someone like me?  I would appreciate it!  :) 

I get lost at "add the bin..."

  • To compile the firmware, you'll need arm-gcc version 4.7
  • Add the bin directory to your PATH, and run 'make', you'll get the list of the available targets.
  • 'make pfm' builds the firmware.
  • Then put your preenfm2 in bootloader mode. Look at DFU part 4.
  • 'make installdfu' flash the firmware on the preenfm2 using the DFU protocol.
  • Once it's done, unplug the power cable and plug it back.

Take care,
Kyle
« Last Edit: August 23, 2019, 09:47:09 PM by kylelandstra »

Xavier

  • Administrator
  • Hero Member
  • *
  • Posts: 2260
    • View Profile
Re: New filters
« Reply #25 on: August 24, 2019, 12:14:10 PM »
Hello!
Could someone provide steps to upgrade this for me?  I have upgraded my PreenFM2 to 2.10 o but do not know how to adjust the source code to add these new filters.  Is anyone able to "dumb down" the steps for someone like me?  I would appreciate it!  :) 
Kyle

Hi,
You don't have to compile the firmware.
Download the latest firmware attached to Toltekradiation's message just above.
Easiest way to upgrade is is to put in on your USB key and to flash from it. Step 1&2 here : http://ixox.fr/preenfm2/manual/upgrade-firmware/

kylelandstra

  • Team member
  • *
  • Posts: 16
    • View Profile
Re: New filters
« Reply #26 on: August 24, 2019, 05:44:40 PM »
Oh wow, I didn't even see the attachment  :-[ Haha thank you.  So excited!

Toltekradiation

  • Sr. Member
  • ****
  • Posts: 272
    • View Profile
Re: New filters
« Reply #27 on: August 24, 2019, 08:14:22 PM »
hey, wait !
there is another version ;D
this one add some playability : i rounded the volume to avoid big changes while trying fx,
reworked the xor fx ; i didn't like too much the previous version..
+ 2 experimental filters based on lowpass & xor operation

kaosbeat

  • Team member
  • *
  • Posts: 11
    • View Profile
Re: New filters
« Reply #28 on: August 25, 2019, 02:01:49 PM »
 @toltekradiation would it be crazy for you to merge your changes with the Eurorack version as Xavier described in an earlier posty? no idea where to start...

Quote
FYI the eurorack version is in the "adcIn" git branch : https://github.com/Ixox/preenfm2/tree/adcIn


Toltekradiation

  • Sr. Member
  • ****
  • Posts: 272
    • View Profile
Re: New filters
« Reply #29 on: August 25, 2019, 08:58:49 PM »
ok, i finally understood how to checkout a git branch,  ;)

here is the adcIn version as attachment