Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - shiftr

Pages: [1] 2
1
PreenFM2 / Adapter/USB power
« on: May 01, 2014, 10:53:44 PM »
Maybe a stupid question...?
But...

Will using the USB connector and powering it from a wall wart adapter WITH the jumper installed damage the PreenFM2?

2
PreenFM2 / Re: [Fixed] PreenFM2 doesn`t boot
« on: January 11, 2014, 07:29:52 PM »
I think the old usb sticks are USB 1.0 and not 2.0 .. maybe that has something to do with it?

3
PreenFM2 / Re: [Fixed] PreenFM2 doesn`t boot
« on: January 11, 2014, 05:53:55 PM »
yes had the directory...

4
PreenFM2 / Re: Panning, Volume and some other things
« on: January 01, 2014, 11:11:32 AM »
I think the last .. redirecting everything on channel 1.... I was using ableton live.

Could you please make the panning go hard left and right? Gives a lot of extra possibilities. Like having 2 mono instruments on different mixer channels for example.

Shouldn't the pot be a log pot then? Even better would be to use a stereo pot directly on the outputs.

5
PreenFM2 / Re: Panning, Volume and some other things
« on: December 30, 2013, 11:56:51 PM »
oh last thing had to do with usb midi in out setting. I was maybe controlling the parameters of instrument 1 via a loop in my computer (?).

6
PreenFM2 / Re: Panning, Volume and some other things
« on: December 30, 2013, 11:48:57 PM »
oh and another really strange thing is that i'm always editing the parameters of all 4 instruments at once.....

7
PreenFM2 / Panning, Volume and some other things
« on: December 30, 2013, 11:33:15 PM »
After some hours of fiddling i have some questions about a few things...

By the way i'm on (beta) firmware 0.9mo

1. Panning .. The panning doesn't seem to go hard left and hard right but only a little bit left and right. Is this by design?

2. The volume pot controls the volume digitally. But the pot is linear and so is the volume software volume control. Shouldn't there be a log curve in this.

3. When the volume is very soft you can clearly hear but reduction effects... And i love it!!! can we have a bit cruncher effect in there? Would be great if it could be set per operator.

8
PreenFM2 / New Preen Build from PCB
« on: December 30, 2013, 07:37:39 PM »
Finished my PreenFM2 yesterday ... first it didn't start but that was due to a bad usb drive.

I decided this is the last time i bought a display from buy display... The prices and the choice is really nice but they just don't look very good.

I made the case myself at the local fablab from a piece of plexi i still had. Don't know if i like the color though.
If somebody really likes it i can make another case like this.

thanks Xavier nice work. I love algorithm 27 :)

I'll have to dive in now...

9
PreenFM2 / Re: [Fixed] PreenFM2 doesn`t boot
« on: December 30, 2013, 06:56:16 PM »
I tried the new firmware... same thing it doesn't boot with the old usb stick but works with the new one. With the old one it get's stuck as soon as the whole screen lights up with the new animation.

10
PreenFM2 / Re: [Fixed] PreenFM2 doesn`t boot
« on: December 30, 2013, 12:27:13 AM »
OK i will try it when i have to open my case again.. I build it from the PCB and i had all parts in except the MIDI connectors so i have to open it on emore time to get those in.. I also would like to get my new and big usb stick out of there.

11
PreenFM2 / Re: [Fixed] PreenFM2 doesn`t boot
« on: December 29, 2013, 11:06:04 PM »
Thanks for this post... I had the same issue ,,, I was also trying to use an old 512MB usb stick i had lying around.

12
PreenFM1 (the blue one) / Re: PreenFM case for free
« on: August 30, 2013, 11:17:30 PM »
it's been gone for a while now...

13
PreenFM1 (the blue one) / PreenFM case for free
« on: April 26, 2013, 12:30:58 PM »
I have this lasercut case made from plexi and wood. I build myself a new case so i don't need this anymore. I also have some black plexi parts so you can make a weird compi of wood clear and black plexi.
You can have it for free+shipping cost from the Netherlands... contact me dennisvantilburg (at) g m a i l DOT c o m

14
http://synth.me/music-gear/brian-enos-amazing-dx7-hardware-programmer

just to give an idea of how many knobs a full fm synth programmer needs...
i think the preenfm already does a wonderful job at giving good ui acces for programming fm.

15
I put the OS on it before i put in in the preen... Even before i build the preen first thing i did was check if i could get the OS on the clone before i ordered the other parts.

Pages: [1] 2