Messages

1

preenfm2 and preenfm3 / Re: Preenfm2 Program Change messages only works on Bank 1?

« on: Today at 02:05:28 PM »

Hi,

I know it's not very clear.
But from the midi doc (https://ixox.fr/preenfm2/preenfm/midi/) :

Program change
Bank select (CC#0) and Bank Select LSB (#32)
Preenfm bank : CC#0 = 0 then  CC#32 = Preenfm bank number
Combo bank : CC#0 = 1 then CC#32 = Combo number
DC7 bank : CC#0 = 2 then CC#32 = DX7 bank from 0 to 127
DC7 bank : CC#0 = 3 then CC#32 = DX7 bank from 128 to 55

So to access Bank2, program 26 you should send :
CC#0 = 0 (optional because that's the default)
CC#32 = 1 (for Bank 2, it's 0 based)

Then program change will select the preset in Bank2.

2

preenfm2 and preenfm3 / Re: DX7 banks dont appear in preen fm2

« on: Today at 02:01:25 PM »

Hi,

Only 4104 bytes Sysex file are compatible. I think there are other sysex with different sizes and they won't work.
They must also have .syx extension.

256 is the max number of DX7 file you can have. Because they are pre-read and filename are in memory.

Reminder : The first FAQ of preenfm3 also applies to prrenfm2 :
https://github.com/Ixox/preenfm3/wiki/FAQ


Xavier

3

preenfm2 and preenfm3 / Re: Vosim & al.

« on: March 28, 2024, 10:27:55 PM »

Thanks a lot.
I think i'll have time to look at it this week-end.

EDITED : i didn't do it.... But i keep that in my radar.

4

preenfm2 and preenfm3 / Re: Vosim & al.

« on: March 17, 2024, 07:07:20 PM »

Thanks.
I need to add a little documentation somewhere about the new algos..

And will do the preenfm2 version very soon.

5

preenfm2 and preenfm3 / Re: preenfm3 : v1.03 (Toltekradiation/pvig : "vosim" algos + CC + fix)

« on: March 17, 2024, 07:06:06 PM »

New firmware 1.03 is available thanks to Toltekradiation  ! 

https://github.com/Ixox/preenfm3/releases

. 4 New vosim algos (synced windowed modulation) (29->32)
. New midi CC to control paraphonic filter (FX2)
. small adjustment to Filter2 "BODE" and to Filter1 "Sigma"

6

preenfm2 and preenfm3 / Re: Vosim & al.

« on: March 17, 2024, 02:44:43 PM »

OK i clean up a little as localEnv were not used anymore in getNextBlockWithFeedbackAndEnveloppe.
Let me know if it's OK for you.
If yes can you "approve" the PR. I'll then know it's good for you.

Thanks

7

preenfm2 and preenfm3 / Re: Vosim & al.

« on: March 17, 2024, 02:30:10 PM »

Hello Xavier,
i answered about Osc.h in the PR : it's about a small cpu optimization..

I thought there were a problem.
I looked again and it looks good. Thanks 

8

preenfm2 and preenfm3 / Re: Vosim & al.

« on: March 17, 2024, 10:47:26 AM »

Thanks again Patrice for this new algos.
They really add something to the sound possibilities of the preenfm.
And as they are separate new algos, there's not reason not to include them

I finaly have a PR, can you take a look ?
https://github.com/Ixox/preenfm3/pull/47/

Also, let me know what you think of the commit i added on top yours.
I don't think index should be 0 when we sync. Index should correspond to the phase of the master osc. No ?
Don't hear any obvious change in most presets, but i think that could be more "hearable" when waveform are smaller.

Please confirm the changes :
. 4 New vosim (synced windowed modulation) algos
. New midi CC to control paraphonic filter (FX2)
. small adjustment to Filter2 "BODE"
Anything else i miss ?

Can you explain you change in Osc.h (i added a commment in the PR)..
I don't understand.

Thanks 

9

preenfm2 and preenfm3 / Re: PFM3 not booting unless I press reset button on bottom of PCB

« on: February 25, 2024, 05:18:27 PM »

Nice to read its now fixed.

Without a jumper to set boot0 to GND the boot select in unpredictable.
I think a jumpter fell off, or you were lucky untill now to have it working all the time.

10

preenfm2 and preenfm3 / Re: filtering USB +5V line

« on: February 25, 2024, 05:09:45 PM »

Thanks for the update.
So here is the schema that fix the noise ?
Cool 

11

preenfm2 and preenfm3 / Re: Released an EP featuring a bunch of PreenFM2

« on: February 25, 2024, 05:05:54 PM »

Yes !! Nice ! thanks for sharing. 

12

preenfm2 and preenfm3 / Re: PC/MAC preenfm editor 3.1.4 (Preenfm2 Unison)

« on: January 21, 2024, 06:22:42 PM »

Somehow the conexion works in the Standalone editor but as soon as i select the device in a DAW and send midi to it (tried with ableton and reaper) the standalone connexion also stop working.

Hi hupelcanel,

It should work with windows 10.

The preenfm editor open a direct connection to the midi device to to talk to the hardware.
So the standalone AND the plugin version cannot be used at the same time.

And for the plugin to work in a DAW you want to make sur that the daw does not already use the connection.
For AbletonLive for in Preferences>MIDI
And make sure "PreenFM MK2" is not used neither in input nor in output. All box must be unchecked.
Then you should be able to select "PreenFM MK2" in input and output in the plugin.
Xavier

13

preenfm2 and preenfm3 / Re: Vosim & al.

« on: January 21, 2024, 06:15:14 PM »

That's really cool. Thanks 

My work pulled me away from preenfm firmware the last couple of months.
It should much better in a week or so.
I cannot wait to take a look at that.

14

preenfm2 and preenfm3 / Re: tuning

« on: November 04, 2023, 06:26:30 PM »

Hi,

The micro tonality can only be achieved through Scala files.
You can write your own scale and import them into your preenfm3.
So the limits are the scala file limit:
https://www.huygens-fokker.org/scala/scl_format.html

You can still change the default frequency values here (128 values for midi note from 0 to 127) :
https://github.com/Ixox/preenfm3/blob/master/firmware/Src/synth/waves.c#L1
And recompile the firmware.

Xavier

15

preenfm2 and preenfm3 / Re: How works performance?

« on: November 03, 2023, 11:10:30 AM »

You have 4 performance values (P1, P2, P3, P4) all in the same page.
These are sources in the matrix modulation (perf1, perf2, perf3, perf4) that you can assign to the destinations you want.

You also have a shorcut to the 2 FX1 parameters.

The idea it to have a live oriented page, where you can control your sound without having to browse different pages.